How to Land a Plane on Microsoft Flight Simulator X

Step-by-Step Guide

1. 1

   Step 1: Line up with the runway.

   Look at your GPS.
   
   Make sure you are perfectly lined up with the runway you want to land on.
2. 2

   Step 2: Call ATC.

   ATC (Air Traffic Control) will clear you for an approach.
   
   Enter the CORRECT runway. , If you are 1nm away, start getting low. 1,700 feet (518.2 m) about. ,, Press F7 once. ,, Do this when you are somewhat close to the landing strip. ,,, Leave the flaps if you are in a small plane. , Reduce throttle to idle. , Touch down with the rear gear, and about 2 seconds later, gently bring the front gear down.
   
   Wait a moment, then apply the brakes. ,
3. 3

   Step 3: Get to reasonable height.

4. 4

   Step 4: Lower the landing gear.

5. 5

   Step 5: Lower the flaps 1 time.

6. 6

   Step 6: Lower throttle to 35%

7. 7

   Step 7: Lower the flaps 2 more times.

8. 8

   Step 8: Arm the spoiler (SHIFT+/)

9. 9

   Step 9: Raise throttle to 62%

10. 10

    Step 10: Lower the flaps one last time if in an airliner.

11. 11

    Step 11: Put down the last of the flaps (once you are very close) on a small plane

12. 12

    Step 12: put up the speed brakes on a big plane.

13. 13

    Step 13: Turn onto a taxiway when you are directed to by ATC.

Detailed Guide

About the Author