Do-it-yourself projects, home repairs, and fixing guides for the handy homeowner.
Loosen the nuts that hold the axle to the frame., Release the brakes if your bike is equipped with them and they...
Prepare a travel bag containing all of the tools and equipment necessary to replace a blown inner tube., Detach the...
Pop off the front wheel., Secure the wheels and frame to an immovable object., Secure the front wheel (if not...
Secure the object being lifted., Close the release valve, using the handle., Position the jack saddle., Raise the jack...
Find a trustworthy mechanic before you actually need one so that you won't be pressed into locating one in a hurry if...
Remove the key head., Align the lock for key removal., Clear the car lock area for key removal., Lubricate the lock...
Align the roller chain ends on the sprocket., Install the plate and pin assembly., Install the master link plate...
Remove the hitch pin from the 1/2 inch (12.7mm) axle bolt., Remove the wheel from the trailer. , Setting the retaining...
Locate the receiver tube assembly (the heavy sub assembly wrapped in the brown corrugated insert) and the upright (the...
Find the owner’s manual., Check if all parts are included., Get your tools., Lubricate your parts., Locate the minimum...
Begin by assembling each 3ft., Attach (1) 3in., Attach (1) t-connector to each 3 in., Insert (1) 2in., Attach (1)...
Find a bicycle in good working condition to modify., If your bike doesn't have multiple sprockets on the cranks (the...
Open the door.,If the lock sticks out of the top of the inner panel, remove it--usually by unscrewing it., Locate the...
Wash the area around the rust spot., Dry the area to be repaired. , With masking tape, tape off the area surrounding...
Ensure your vehicle jack and jack stands are in proper working order and have the capability of lifting your vehicle...
Assess the size and location of the dent., Purchase a clean plunger., Moisten the rubber edge on the plunger., Position...
Run bike until no fuel remains in tank, or manually empty fuel tank and run until bike fuel line is dry., Shut fuel...
Consider how much you want to spend for mounting hardware., Consider how high you want to hang your bike., Decide how...
Carefully slide or cut off the old grip., Clean bar with soap/water to remove WD-40, dust, and gunk., Use 3-4 long...
Listen for the washer fluid pump., Inspect the jets for external blockages., Use a pin to clear deeper blockages., Run...
Heat it with a hairdryer., Use a plastic blade., Use a plastic card., Use a razor blade., Spray residue remover., Use a...
Ensure the vehicle is in park., Inspect the key for damage., Ensure there is nothing stuck to the key., Check to see if...
Turn the steering wheel slightly., Make sure your vehicle is in park or neutral., Put your foot on the brake., Turn the...
Use a charger., Make sure the battery terminals are clean., Test the charging system with a Voltmeter., If you suspect...
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides
Browse guides