How to Use a Biscuit Joiner

Step-by-Step Guide

1. 1

   Step 1: Align the pieces of wood you want to join.

   Use as many biscuits as needed to secure the pieces of wood. , The biscuit process allows some leeway in aligning the pieces of wood, so perfect alignment is unnecessary. ,,, Apply pressure to release the blade, allowing it to cut the wood.
   
   The joiner's cutting blade will retract while it is idle.
   
   The crescent shaped slots may be longer and larger the joiner biscuit; this allows a user to better align the joined pieces just before the glued joiner biscuit starts to set. ,,,, Upon being clamped, the compressed biscuit will expand to fill the crescent shaped slot and create a strong bond between the two pieces as it dries. ,,
2. 2

   Step 2: Make marks at the places where biscuits will be placed.

3. 3

   Step 3: Mark the other piece of wood at the same locations.

4. 4

   Step 4: Use the settings and stops on the biscuit joiner to set the depth of the cut.

5. 5

   Step 5: Place the joiner firmly on the pencil markings.

6. 6

   Step 6: Turn on the joiner and push it forward to cut a crescent shape into the wood.

7. 7

   Step 7: Cut slots at each location on each piece of wood.

8. 8

   Step 8: Cover each biscuit with wet wood glue or apply glue inside the slots.

9. 9

   Step 9: Slip a biscuit into each one of the slots at each location.

10. 10

    Step 10: Clamp the two pieces of wood firmly with wood clamps.

11. 11

    Step 11: Wipe away any excess glue before it dries.

12. 12

    Step 12: Clean the joiner according to product directions before storing when not in use.

Detailed Guide

About the Author